0x80070035: The network path was not found
Most likely cause: The target computer or server is powered off, disconnected from the network, or the network path name was typed incorrectly.
Try first: Double-check the network path
Likely causes
- The target computer or server is powered off, disconnected from the network, or the network path name was typed incorrectly.most likely
- Windows Firewall, third-party firewall, or antivirus software is blocking file and printer sharing traffic.possible
- SMB protocol is disabled, network discovery is turned off, or the two computers are on different networks/subnets.possible
How to fix it
Double-check the network pathSafe
Make sure the address you entered (for example \\computername\sharename) is spelled exactly right, including backslashes.
Test basic network reachabilitySafe
Open Command Prompt and type ping followed by the computer name or IP address of the target machine. If ping fails, the device is not reachable on the network.
ping computernameRun the built-in network troubleshooterSafe
Go to Settings > Network & Internet > Status and click Network troubleshooter. Let it scan and apply any fixes it finds.
Temporarily disable firewall/antivirusChanges settings
Turn off Windows Firewall or your security software for a minute and try accessing the path again. Re-enable it immediately afterward.
⚠ Only do this briefly for testing; leaving protection off leaves your PC exposed.
If that didn't fix it
Open Command Prompt as administrator and run the command net use to list current connections, then try to map the drive again with the exact path.
When to see a technician
If the shared location contains important work files and you cannot reach it after the steps above, ask your network administrator or IT support for help.
Quick answers
- What does 0x80070035: The network path was not found mean?
- Windows cannot reach a shared folder, drive, or network location you tried to open. The computer or server at that address is either unreachable, turned off, or the path name is wrong.
- What causes 0x80070035: The network path was not found?
- The target computer or server is powered off, disconnected from the network, or the network path name was typed incorrectly. (most likely) Windows Firewall, third-party firewall, or antivirus software is blocking file and printer sharing traffic. (possible) SMB protocol is disabled, network discovery is turned off, or the two computers are on different networks/subnets. (possible)
- How do I fix 0x80070035: The network path was not found?
- Try these in order, safest first: 1. Double-check the network path. 2. Test basic network reachability. 3. Run the built-in network troubleshooter. 4. Temporarily disable firewall/antivirus.
- What if that didn't fix it?
- Open Command Prompt as administrator and run the command net use to list current connections, then try to map the drive again with the exact path.
- When should I see a technician?
- If the shared location contains important work files and you cannot reach it after the steps above, ask your network administrator or IT support for help.